CJ02
Application: Hard floor granite, marble, terrazzo (bottom wax and face wax are better for two times each) Mirror tile, porcelain tile, glazed tile (bad waxing effect, easy to fall off); soft floor rubber floor series, PVC floor Series; wood flooring series solid wood flooring, composite flooring.
Below we briefly introduce how to polish and wax the floor. The main steps are as follows:
1. Staff carefully read relevant work manuals, wear relevant work clothes and prepare working tools;
2. Use a dilution tool to dilute the neutral detergent at a reasonable ratio;
3. Drop the bottom wax twice on the clean and dry ground surface, and then use the air dryer to dry the waxed floor fully;
4. After the wax surface is completely dry, use a high-speed polishing machine with a polishing pad to perform uniform and uniform polishing.
■It is handy and has a beautiful appearance and a precise and compact internal structure;
■It uses an air-cooling motor and adopts the double-capacitor design, allowing a safer operation;
■It has multiple functions such as carpet and floor cleaning, wax removing, low-speed polishing, floor crystal treatment and renewing;
■Accessories: main body, handle, water tank, pad holder, hard brush, soft brush;
Technical Specification
Voltage: 220V-240V~
Power: 1100W
Speed: 175rpm/min
Power line length: 12m
Base plate diameter: 17."
Weight: 48kg
CJ05
The floor polishing machine uses a motor to drive the brush head through a gear reduction mechanism to change the brush disk equipped on the brush head to complete the functions of waxing and polishing. According to the structure, it is divided into single disc type, double-disc type, three-disc type waxing machine and waxing polisher. The double-disc type waxing machine is small in size, convenient to use and suitable for home use. The three-disc polisher is equipped with a vacuum cleaner. The waxing and polishing machine has the dual functions of waxing and polishing, which can be used on large areas of the ground.
It has a casing, a handle is provided on the casing, a motor is provided in the casing, and a disc is disposed outside the casing. The disc axis and the motor axis are eccentrically mounted with an eccentric distance of 7mm. The balance weight is directly connected to the motor and the balanced weight. The housing is also provided with a charging socket, and soft material is attached to the outside of the handle. The utility model has the advantages that the external structure design conforms to ergonomics, is beautiful and compact; the mechanical loss during work is small, and the battery working time is extended; the work is stable, the noise is low, and the waxing effect is good.
■It is a super high power air-cooling motor and the double-capacitor design allow a safer operation;
■It provides a strong power output;
■It has multiple functions such as carpet and floor cleaning, wax removing, low-speed polishing, floor crystal treatment and renewing;
■Accessories: main body, handle, water tank, pad holder, hard brush, soft brush;
Voltage: 220V-240V~
Power: 1100W
Brush rotation speed: 154rpm/min
Power line length: 12m
Brush plate diameter: 17."
Net weight: 48kg
CJ2A
Floor polishing is applied to solid wood floors, PVC (plastic) floors, stone floors (marble, granite, terrazzo), etc. The surface is coated with a layer of wax. After the wax is cured, it is isolated from air, moisture and dust, and at the same time it is non-slip, Anti-wear, anti-static effect, to better maintain the floor and extend the life of the floor. Waxing is divided into two types: solid wax and liquid wax. Floor waxing requires professional waxing. The wax layer and wax solution must be evenly distributed, and the thickness is moderate, to achieve a bright and clean floor.
Remove stubborn stains on the floor, isolate the material from the air by waxing, reduce the damage to the material due to oxidation or contact with harmful substances in the air, and achieve the purpose of extending the life of the material and beauty. What's more important is that the mirror-bright surface formed by it is particularly durable, which can prevent detergent, scratches, slips, heel friction and other injuries. At the same time, the wax surface is lighter, harder and more durable after polishing.
■The machine features convenient operation, safe use and excellent cleaning effect;
■It is especially suitable for cleaning the carpet, floor, low-speed polishing for various types of floor and refitting of stone surface for hotels, restaurants, office buildings and exhibition halls;
■The product boasts high cleaning efficiency and can greatly save the time of cleaning, being necessary and important equipment for modern mechanical cleaning work;
■Accessories: soft brush, hard brush, pad holder, water tank;
HY2A Technical Specification
Voltage: 220V~50HZ
Power: 1100W
Speed: 175rpm/min
Power line length: 12m
Base plate diameter: 17."
Net weight: 38.2kg
